PV modules on the outside.

I[n]solation
Questions & Topics
Windows · Light & Energy Balance
FVS · Principles, Construction & Testing
Façade · Sun, Storage & Adaptability
Summer · Shading, Heat & Comfort
Heat Pumps · Peak Loads, PV & Controls
Renovation · Costs, Measurements & Implementation
Energy Transition · Ideas, Industry & Society

PV modules on the outside.

Dynamic thermal protection behind them. A simple mounting system on the wall. That is how simple assembled components could become an energy-active building envelope. The pictures show a simple demonstrator. My aim wasn't to present a finished design, but to show the basic logic: A semi-transparent PV module forms the outer layer. Behind it is a film layer for dynamic thermal protection. The whole thing is supported by simple rails and brackets of the kind familiar from other mounting systems. Fixed film layers are arranged on the left and right. The dynamic section sits in the middle: the films can be rolled up and down, or opened and closed. The idea behind it is simple: Components don't always have to be glued, installed using wet processes or permanently joined. They can be assembled, removed, replaced and developed further. PV modules as the outer surface. Films as a lightweight thermal protection layer. Rails as the supporting structure. The pictures show the basic logic: PV outside, dynamic thermal protection behind it, an assembled structure as the foundation. Can we use simple means to build an energy-active building envelope that's inexpensive to manufacture, easy to transport and practical to install?
Direct link to this article