An adaptive building envelope is intended to help a building benefit from the sun and outdoor climate while needing as little external energy as possible.

I[n]solation
Questions & Topics
Windows · Light & Energy Balance
FVS · Principles, Construction & Testing
Façade · Sun, Storage & Adaptability
Summer · Shading, Heat & Comfort
Heat Pumps · Peak Loads, PV & Controls
Renovation · Costs, Measurements & Implementation
Energy Transition · Ideas, Industry & Society

An adaptive building envelope is intended to help a building benefit from the sun and outdoor climate while needing as little external energy as possible.

At its centre is a solid wall. It is seen not only as a load-bearing structure but also as a thermal store. The thermal mass is already there: the wall itself. It absorbs heat and releases it again after a delay. The wall is coated black on the outside. This allows its surface to absorb up to 95% of the incident solar radiation. A post-and-beam structure is fitted to the wall. It supports an outer covering that may be transparent, semi-transparent or made of photovoltaic modules. The entire structure is assembled without wet construction processes and can be altered, extended or dismantled if needed. Between the wall and the covering is the dynamic thermal protection layer of the FVS, the multilayer film composite system. In the closed state, several parallel reflective films form defined air layers. This gives the layer an insulating effect comparable to a conventional insulation layer. When there is sunshine and a need for heat, the thermal protection layer remains open. The black-coated wall absorbs the radiation and stores the heat. When the sun has gone and the stored heat is meant to stay in the wall, the thermal protection layer closes. It then reduces heat losses to the outside. In summer it stays closed during the day and acts as protection against heat. At night it can open so the wall can release heat to the outside.
Direct link to this article